Home → Products → HANDLER Red Wing Lathes/Chuck Changer & Accessories, All Types

HANDLER Red Wing Lathes/Chuck Changer & Accessories, All Types

Handler 26A Red Wing Lathe
Handler 26A Red Wing Lathe
HANDLER Red Wing Lathes/Chuck Changer & Accessories, All Types

Handler International

Types

All Types
Description RED WING LATHE 26A
A full 1/4 HP, 1725/3450 RPM two-speed lathe for use on top of laboratory bench.
Its 4 1/2” [11.4cm] shaft height allows for easy use by the technician with hands resting on the tabletop. Maintenance free standard dental, tapered shafts—each includes a right and left chuck remover for easy removal of standard dental chucks. Chucks and accessories ordered separately. The 26A is manufactured to provide years of durable service while being utilized for such operations as polishing and grinding.

115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost. Shipping Wgt.: 39 lbs [17.7 Kg] Unit Dimensions: 15 1/2” L x 8” W x 7 3/4” H [39cm x 20cm x 20cm]

RED WING LATHE 28L
A full 1/3 HP, 1725/3450 RPM two-speed lathe for use on top of laboratory bench.

Its 4 1/2” [11.4cm] shaft height allows for easy use by the technician with hands resting on the tabletop. Maintenance free standard dental, tapered shafts—each includes a right and left chuck remover for easy removal of standard dental chucks. Chucks and accessories ordered separately. The 28L is manufactured to provide years of durable service while being utilized for such operations as polishing and grinding.

115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost. Shipping Wgt.: 39 lbs [17.7 Kg] Unit Dimensions: 15 1/2” L x 8” W x 7 3/4” H [39cm x 20cm x 20cm]


RED WING LATHE 26
A full 1/4 HP, 1725/3450 rpm two-speed polishing lathe with 6” [15.2cm] shaft height. Designed and built for use as a polishing lathe, its tapered shaft will accept standard dental tapered chucks. Includes a left and right chuck remover for easy removal of chucks.
The 6” [15.2cm] shaft height of the 26 will allow the technician to utilize larger diameter buffing wheels for pumice and dry polishing operations. The 26 is manufactured to provide years of durable service when used for polishing and grinding.

115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 41 lbs [18.6 Kg]
Unit Dimensions.: 15 1/2” L x 8” W x 9 1/4” H  [39cm x 20cm x 23cm]

RED WING LATHE 28H
A full 1/3 HP, 1725/3450 rpm two-speed polishing lathe with 6” [15.2cm] shaft height. Designed and built for use as a polishing lathe, its tapered shaft will accept standard dental tapered chucks. Includes a left and right chuck remover for easy removal of chucks.
The 6” [15.2cm] shaft height of the 26 will allow the technician to utilize larger diameter buffing wheels for pumice and dry polishing operations. The 28H is manufactured to provide years of durable service when used for polishing and grinding.

115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 41 lbs [18.6 Kg]
Unit Dimensions.: 15 1/2” L x 8” W x 9 1/4” H  [39cm x 20cm x 23cm]

RED WING LATHE 27
A full 1/4 HP single speed 3450 rpm polishing motor with a 6” [15.2cm] shaft height (115Volts/60Hz). Designed to be utilized by the technician who desires a single speed polishing motor where a 3450 rpm speed is used exclusively for polishing. Chucks accessories additional.

115V/60Hz.Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 41 lbs [18.6 Kg]
Unit Dimensions.: 15 1/2” L x 8” W x 9 1/4” H  [39cm x 20cm x 23cm]


CHUK/CHANGER W/ LATHE 16B
(Order 16b & 16B-1 with the 7L Spindle)
Model 16B is the Chuk/Changer factory-installed to the right side of a 26A Low Base, Red Wing Lathe.This combination provides the technician with the ultimate in chuck changing efficiency at both low and high lathe speeds.The movement of the activating handle allows the technician to change from 1/4” [6.4mm] to 3/32” [2.4mm] burs, mandrels and chuck accessories without stopping the lathe.This combination will pay for itself in time saved, while providing excellent concentricity for accurate, professional results in finishing appliances. All chuck and maintenance accessories included.

115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 41 lbs [18.6 Kg]
Unit Dimensions: 18 1/4” L x 8” W x 7 3/4” H [45cm x 20cm x 19cm]


CHUK/CHANGER W/ LATHE 16SB
(Order 16b & 16B-1 with the 7L Spindle)
Model 16SB is the Chuk/Changer factory-installed to the right side of a 26A Low Base, Red Wing Lathe.This combination provides the technician with the ultimate in chuck changing efficiency at both low and high lathe speeds.The movement of the activating handle allows the technician to change from 1/3”  to 3/32” [2.4mm] burs, mandrels and chuck accessories without stopping the lathe.This combination will pay for itself in time saved, while providing excellent concentricity for accurate, professional results in finishing appliances. All chuck and maintenance accessories included.

115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 41 lbs [18.6 Kg]
Unit Dimensions: 18 1/4” L x 8” W x 7 3/4” H [45cm x 20cm x 19cm]


CHUK CHANGER 16B-1
(Order 16b & 16B-1 with the 7L Spindle)
Model 16B-1 is the 16 Chuk/Changer factory-installed on the right side of a Model 26 High Base Red Wing Lathe. The 16B-1 will allow the technician to utilize larger diameter buffs and abrasives, while obtaining the accuracy and speed of interchanging both 3/32” [2.4 mm] and 1/4” [6.4 mm] burs, mandrels and chuck accessories while the lathe is in motion. This combination will pay for itself in time saved, while providing excellent concentricity for accurate, professional results in finishing appliances. All chuck and maintenance accessories included.

115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 45 lbs [20.4 Kg]
Unit Dimensions.: 18” W x 8” D x 9 1/4” H  [45cm x 20.3cm x 23cm]


CHUK CHANGER 16SB-1
(Order 16b & 16B-1 with the 7L Spindle)
Model 16SB-1 is the 16 Chuk/Changer factory-installed on the right side of a Model 26 High Base Red Wing Lathe. The 16SB-1 will allow the technician to utilize larger diameter buffs and abrasives, while obtaining the accuracy and speed of interchanging both 3/32” [2.4 mm] and 1/3” burs, mandrels and chuck accessories while the lathe is in motion. This combination will pay for itself in time saved, while providing excellent concentricity for accurate, professional results in finishing appliances. All chuck and maintenance accessories included.

115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 45 lbs [20.4 Kg]
Unit Dimensions.: 18” W x 8” D x 9 1/4” H  [45cm x 20.3cm x 23cm]


ACCELA/ROTOR 16C
The 16C Accela/Rotor is a combination of the Handler Accela/Rotor attachment 16D and No. 26A Red Wing Lathe.The Accela/Rotor attachment converts the right side of the lathe from standard lathe speeds of 1725/3450 rpm to 12,000 and 24,000 rpm for use in finishing non-precious alloys and chrome-cobalt alloys. The 16C is shipped complete with a Red Wing Lathe, Accela/Rotor with movable light and protective shield, high speed spindle, adjusting levers and necessary guards.
The high speed spindle incorporates an activating handle which opens and closes the 3/32” [2.4mm] collets for ease of changing burs and mandrels while the motor is running. 

115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 50 lbs [22.7 Kg]
Unit Dimensions: 19” W x 9” H x 11” D [48.2cm x 22.9cm x 30cm]


ACCELA/ROTOR ATTACHEMENT 16D
The 16D Accela/Rotor attachment thurns your Red Wing Lathe into a High Speed alloy grinder. It attaches to the right side of your Red Wing Lathe and provides 12,000 and 24,000 rpm speeds for proper metal finishing. Shipped complete with all necessary guards, instructions, light, and high speed spindle.
 
Shipping Wgt.: 11 lbs [5.0 Kg]
Unit Dimensions: 14” W x 12” H x 17” D [36cm x 31cm x 43cm]


CHUK/CHANGER COMPLETE LEFT OR RIGHT 16
The Handler Chuk/Changer was designed to provide full automatic, precision changing of 1/4” [6.3mm] and 3/32” [2.4mm] diameter burs, mandrels and chuck accessories with the slight movement of a handle while the motor is turning. The Chuk/Changer provides the technician with exacting concentricity and quick, easy changing of various chucks which greatly speeds grinding, polishing and finishing procedures. 
The 16 Chuk/Changer is installed on the right side of the lathe and is adaptable to most types of dental motors, including Red Wing and Baldor (special adapter required).

The 16 Chuk/Changer Kit is shipped complete with chuck accessories as follows: 
P16-15 Arbor Band Chuck 
P16-16 Spiral Tapered Chuck 
P16-19 Stone Chucks 
P16-20 Mandrel (1/64) 
P16-21H Mandrel (1/32) 
P16-8 Collet Wrench 
P16-10RW Clutch 
P16-ADRW Adapter 

NOTE: Available for left side Model 16L. 
Shipping Wgt.: 3 lbs [2.3 Kg] 
Unit Dimensions: 8 3/4” L x 4” W x 6 1/4” H [22cm x 10cm x 16cm]