Meta Dental Waxes, Wax Carvers and Pots for Crown, Bridge and Denture Work

Dental waxes, wax carvers and wax pots are the core of every wax-up, and the right set depends on whether you are building crown and bridge patterns, spruing for casting, or setting denture teeth. Meta Dental Corp makes all three, and Chase Dental Supply carries the Meta Dental Corp wax and waxing tool line so you can stock your bench from one source.

Below we cover the wax types labs use most, how Meta’s digital wax pots compare, and which carvers and heat sources make sense for crown, bridge and denture work.

Key Takeaways

• Meta casting sprue wax comes in 6, 8, 10 or 12 gauge with a reservoir, 500 pieces per pack.
• The BesQual E100 digital wax pot has four compartments, a 50C to 120C (122F to 248F) range and a digital display.
• The BesQual E120 is a single compartment digital pot; the E350 has four compartments without a digital display.
• The S600 Fire-Free Burner heats instruments without alcohol or gas and has a safety indicator that prevents overheating.
• Meta digital wax carvers, tips and heating tools give steady, controlled heat for detailed carving.

Which dental waxes do you need for crown, bridge and denture work?

Most labs need three families of wax: a pattern or inlay wax for crowns and bridges, sprue wax for casting, and baseplate or setup wax for dentures. Each behaves differently when heated, so keeping them separate helps you get predictable results.

Inlay and pattern waxes

Inlay wax is a hard, fine grained pattern wax used to shape copings, crowns and bridge units before investing. Meta offers several wax types under its Meta Dental Corp Waxes #708-010 listing, and the Meta Dental Corp Waxes #740 listing adds more types and sizes.

Check each product page for the exact wax types currently available, and follow the manufacturer’s instructions for use on working temperature.

Casting sprue wax

Sprue wax forms the channel that molten alloy flows through during casting. Meta casting sprue wax with reservoir comes in 6, 8, 10 or 12 gauge in packs of 500, so you can match sprue diameter to the size of the pattern.

Once the pattern is sprued, it moves to investing. Our guide to Whip Mix Hi-Temp and PowerCast investments covers the next step.

Denture setup wax

For dentures, baseplate and setup wax hold the teeth in position for try-in and later flasking. The same carvers and heat sources described below work for festooning and contouring denture wax-ups.

How do Meta wax pots and dipping pots compare?

A wax pot keeps wax melted at a set temperature so you can add it with an instrument or dip copings without reheating each time. Meta’s BesQual line shares the same footprint and temperature range, and differs mainly in compartments and display.

All three pots list a 90-day warranty. The Meta Wax and Dipping Pots listing also includes the BesQual S800 Multi Digital Dipping Pot, S200 Digital Dipping Pot and S900 Multi-Waxer.

Four compartments or one?

Choose a four compartment pot if you keep several waxes or colors hot at once, such as a cervical wax and a body wax. A single compartment pot like the E120 suits dipping copings in one wax.

Which wax carvers and heating tools should I choose?

Hand carvers are the everyday choice for shaping anatomy, while electric carvers hold a steady temperature for adding and smoothing wax. Most technicians keep both on the bench.

Hand wax carvers

Meta wax carvers are sold one per pack in multiple types and sizes, so you can replace a favorite instrument or build a full set. Common shapes include fine tipped instruments for margins and broader blades for contouring.

Digital wax carvers

A digital or electric wax carver heats the tip itself, so the wax stays at a working temperature without a flame. Meta offers digital wax carvers, replacement tips and heating tools in several types and sizes.

Fire-free and gas burners

The S600 Fire-Free Burner replaces alcohol or gas burners for heating instruments. It is portable, works out of the box, has a safety indicator that prevents the carver from overheating, and includes two removable silicone cups for clean-up.

If your lab prefers a flame, the Meta Bunsen Burner #555 runs on propane or gas, has individual flame control on each tube for single or dual use, and rotates up to 30 degrees left to right.

How do you get clean, accurate wax patterns?

Start with a clean, lubricated die, keep the wax at a consistent temperature, and add wax in small increments. Overheated wax can shrink and distort as it cools, which shows up later as an open margin.

• Keep each wax type in its own pot compartment so colors and hardness do not mix.
• Wipe carver tips often so old wax does not contaminate fresh additions.
• Sprue to the thickest part of the pattern and invest soon after waxing.
• Measure wall thickness with a caliper before investing.

Good wax-ups start with good models. See our model prep essentials guide for arch trimmers, dowel pins and base formers, and the dental lab and office supply brands guide for the other brands we stock.

Shop the Products

Frequently Asked Questions

What is inlay wax used for?

Inlay wax is a hard pattern wax used to shape crowns, copings and bridge units before they are invested and cast or pressed. Meta Dental Corp offers multiple wax types, available at Chase Dental Supply.

What gauges does Meta casting sprue wax come in?

Meta Dental Corp casting sprue wax comes in 6, 8, 10 or 12 gauge with a reservoir, in packs of 500 pieces. Choose the gauge based on the size of the pattern you are casting.

What temperature range do Meta BesQual wax pots cover?

The BesQual E100, E350 and E120 wax pots each list a range of 50C to 120C (122F to 248F). The E100 and E120 have a digital display, and each lists a 90-day warranty.

Is a fire-free burner safer than an alcohol burner?

The Meta Dental Corp S600 Fire-Free Burner heats instruments without alcohol or gas, which removes the open flame from the bench. It also has a safety indicator that prevents the carver from overheating.

Should I use a digital wax carver or hand carvers?

Most technicians use both. A digital wax carver holds a steady tip temperature for adding and smoothing wax, while hand carvers are used for shaping anatomy and fine detail.

A consistent waxing setup saves remakes. Shop the full Meta Dental Corp range at Chase Dental Supply, or call 888-548-7582 or email sales@chasedentalsupply.com and we will help you build your waxing bench.