Bonart Scaler Parts and Accessories: Foot Switches, Handpieces, Boards and Polisher Parts

The fastest way to find the right Bonart scaler parts is to start with your unit’s model number (ART-P3II, ART-M1, ART-M3II, ART-SP1, ART-PL3, ART-PB3, ART-MB3) and then match the part number on the replacement listing. Chase Dental Supply carries Bonart foot switches, power cords, piezo handpieces, polisher parts and built-in system boards, and our team can confirm fit by phone before you order.

This guide is for hygienists, office managers, veterinary practices and service techs keeping Bonart equipment running.

Key Takeaways

• Universal foot switch PP0031-002 works with the Maverick (ART-M1), Marquee (ART-M3II, 25K or 30K), Pelican, Electron, SP1, Kelpie and PL3, but not the Piper (ART-P6).
• The Piper P6 uses its own proprietary foot switch and power cord, sold as a separate listing.
• The BS series piezo handpiece is steam autoclavable and fits the ART-P3II, ART-P4 and ART-P6. It should not be used with the ART-P3 or ART-SP2.
• Polisher parts (micro-motor MM0003-051 and prophy head MM0003-052B) fit the ART-SP1, ART-SP2 and ART-PL3. The ART-SP1 and ART-PL3 are approved for veterinary use only.
• Built-in ART-PB3 and ART-MB3 systems have their own replacement boards and control module. Call with your unit model to confirm.

How do you find the right Bonart scaler parts for your unit?

Start with the model number on the unit’s label or in its manual, then match it to the “fits” list on the part. Bonart part numbers such as PP0031-002 or MM0003-051 are printed on most replacement listings, which makes cross-checking simple.

Two details trip people up most often. First, the Piper (ART-P6) does not share the universal foot switch and power cord with the rest of the line. Second, magnetostrictive units come in 25K and 30K versions, which matters for inserts and for built-in boards. If you are unsure which frequency you have, our guide to 25K vs 30K ultrasonic scaler inserts explains how to tell.

Information to have ready when you call

• Unit model number (for example ART-M3II, ART-P3II, ART-SP1, ART-PB3)
• Voltage (for example 110V)
• Frequency for magnetostrictive units: 25K or 30K
• Serial number, if available
• The part number from your old part or manual, if you have it

Which Bonart foot switch and power cord do I need?

Most Bonart units use the universal foot switch PP0031-002 and the universal power cord PP0018-021. The Piper (ART-P6) is the exception and needs the Bonart Piper P6 Foot Switch and Power Cord.

Universal Foot Switch PP0031-002

The Bonart Universal Foot Switch PP0031-002 is used with most Bonart scalers, polishers and scaler/polisher combo units. Listed compatible units are the Maverick, Marquee (25K or 30K), Pelican, Electron, SP1, Kelpie and PL3. It is also listed as a replaceable part on the ART-SP1 and ART-PL3.

Universal Power Cord PP0018-021

The Bonart Universal Power Cord PP0018-021 is the replacement cord for Bonart units outside the Piper line. Like the foot switch, it does not fit the ART-P6.

External Water Tube

The Bonart Universal Ultrasonic Scaler Accessories listing is the external water tube. It is compatible with the Maverick, Marquee (25kHz or 30kHz), Piper, Pelican, Kelpie and SP1, so unlike the foot switch it does cover the Piper.

What is the Bonart BS series piezo handpiece compatible with?

The BS series piezo handpiece is compatible with the ART-P3II (Pelican), ART-P4 and ART-P6 (Piper). It should not be used with the ART-P3 or the ART-SP2.

The Bonart ART BS Series Piezo Hand Piece and Cables uses an improved transducer for more power and minimal pain during scaling, endo and perio procedures. It can be steam autoclaved and is also compatible with Satelec tips. Bonart lists a 1.5 year limited warranty, ISO and CE certification, and 510K registration.

Tips and the protective handpiece cap for sterilization are not included. For choosing BS tips by procedure, see our Bonart BS piezo scaler tips guide.

Which polisher parts fit the ART-SP1, ART-SP2 and ART-PL3?

The micro-motor MM0003-051 and the prophy head MM0003-052B both fit the ART-SP1, ART-SP2 and ART-PL3. The ART-SP1 scaler/polisher combo and the ART-PL3 polisher are approved for veterinary use only.

Micro-Motor MM0003-051

The Bonart Micro-Motor MM0003-051 is the corded handpiece component for Bonart polishers and scaler/polisher combo units. It attaches to the straight nose cone (MM0003-052).

Prophy Head MM0003-052B

The Bonart Prophy Head MM0003-052B is the polishing head attachment that locks into the top of the straight nose cone. On the ART-PL3 it is listed as a stainless steel prophy head.

ART-PL3 Polisher (Veterinary Use Only)

The Bonart Polisher ART-PL3 110V is approved for veterinary use only. It has a built-in digital display for motor rotation speed, speed control from 0 to 30,000 RPM and Automatic Feedback Control. Listed specs include 110V, 50/60Hz, 30W power, a 2.5m handpiece cable and a weight of 3.7kg with motor.

It ships with the MM0003-051 micro-motor, MM0003-052 straight nose cone and MM0003-052B prophy head. Its replaceable parts list also includes the PP0031-002 universal foot switch. Polishing cups and paste are not included, and the prophy head is compatible with most major brand polishing cups and paste.

The Bonart ART-SP1 Scaler and Polisher Combo shares these same polisher parts and is also approved for veterinary use only.

What replacement parts are available for Bonart built-in systems?

The ART-PB3 built-in piezo and ART-MB3 built-in magnetostrictive systems each have a replacement PC board, plus a Control Module with Screen. Call with your unit model to confirm the correct board before ordering.

The Bonart ART-PB3 Built-In Piezoelectric Scaler and the Bonart ART-MB3 Built-In Magnetostrictive Scaler install directly into a dental chair or table. Both should be professionally installed, and neither includes a solenoid valve, footswitch or transformer.

• Bonart PB3 PC Board (PB3003-072): replacement board for the ART-PB3
• Bonart MB3 PC Board: replacement board for the ART-MB3 (have your 25K or 30K version ready)
• Bonart Control Module with Screen: replacement module for Bonart built-in systems

Electrosurgery Replacement Handpieces

The Electron (ART-E1) electrosurgery unit has its own replacement handpieces. The Bonart Hand Piece for ART-E1 listing covers the Green Tungsten handpiece and the Blue-style handpiece, and each works only with its matching electrode color. For electrodes and accessories, see our Bonart ART-E1 Electron electrosurgery guide.

Bonart Scaler Parts Lookup Table

Tips and inserts are covered separately. For magnetostrictive units, see our Bonart magnetostrictive inserts guide, and for the full lineup of Bonart units read Bonart ultrasonic scalers: piezo vs magnetostrictive.

Shop the Products

Frequently Asked Questions

Does the Bonart universal foot switch fit the Piper P6?

No. The universal foot switch PP0031-002 fits most Bonart scalers and polishers, including the Maverick, Marquee, Pelican, Electron, SP1, Kelpie and PL3. The Piper (ART-P6) uses its own proprietary components, sold as the Piper P6 Foot Switch and Power Cord.

Can the Bonart BS piezo handpiece be autoclaved?

Yes. The Bonart ART BS Series Piezo Hand Piece can be steam autoclaved. The protective handpiece cap for sterilization and the tips are not included, so order those separately.

Which Bonart units does the BS piezo handpiece fit?

The BS series handpiece fits the ART-P3II, ART-P4 and ART-P6. It should not be used with the ART-P3 or ART-SP2. It is also compatible with Satelec tips.

Which units use the Bonart micro-motor MM0003-051 and prophy head MM0003-052B?

Both parts fit the ART-SP1, ART-SP2 and ART-PL3. The micro-motor attaches to the straight nose cone, and the prophy head locks into the top of that nose cone. The ART-SP1 and ART-PL3 are approved for veterinary use only.

What should I have ready when ordering Bonart scaler parts?

Have your unit model number, voltage, 25K or 30K frequency for magnetostrictive units, and the serial number if available. A part number from the old part or manual also helps. Call Chase Dental Supply at 888-548-7582 to confirm fit.

Keeping a Bonart unit in service usually comes down to matching the model number, the part number and, for magnetostrictive units, the frequency. Browse the full Bonart lineup at Chase Dental Supply, or reach our team at sales@chasedentalsupply.com with your model and part number.